Glow In The Dark Tape- Photoluminescent, 2" x 30'

Protect your workers and building occupants during blackouts and evacuations. Our Glow-In-The-Dark Tapes will "GLOW" for up to 6 hours. This product comes with an aggresive permanent pressure sensitive adhesive that will adhere to most any clean, dry surface. Tape absorbs any ambient or UV light source, then releases this stored energy in darkness. Our Glow-In-The-Dark tape offers 6+ hours of Glow to the light adjusted eye. This product meets a variety of safety standards including PSPA, IMO, ISO, and ASTM. See technical data more details.Technical SpecificationsCase Qty: 6 RollsRoll Length: 10 Yards (30')Case Weight: 3 lbs PRODUCT INFORMATION GUIDE Application(s): Flexible laminated film coated with a permanent acrylic pressure sensitive adhesive and backed with a poly coated release liner. Safety grade photoluminescent material designed to glow 6+ hours. Product withstands UV-light and does not show significant degradation when used outdoors. Adhesive: Acrylic Adhesive Total Thickness: 0.010" +/- 10% Liner: 0.005" +/- 10% Tape Application: Minimum application temperature 10C (50F) Surface must be clean and free from dust, dirt, oil, wax, silicone. Cleaning: Clean tape surface with a mild soap, rinse with fresh water. Shelf Life: One year from date of purchase when stored at 70F, 50% relative humidity. Property: Test Method: Measurement: Acrylic Adhesive Peel Test: (Stainless Steel) PSTC-1(modified) 72oz / 24 hour dwell Shear Adhesion: PSTC-7 >24 hours 1/2" x 1/2", 500 grams (Stainless Steel) Glow Properties Color: White / Green Emission Color: Yellow / Green Glow Time: DIN 67510 Xe Lamp 6+ Hours Time Span Necessary For Afterglow Brightness To Diminish To 0.32 mcd/m2 (100 times the human eye perception limit) Standards DIN 67510-1 Luminance measurement of photoluminescent products DIN 53438 (Part 2 / Part 3) Flammability - Reaction to an open flame DIN 53387-1-D-X Weathering - Resistance against color change during testing DIN 53387-2-F Radiation - Resistance against color change during testing DIN 50021-SS Salt Spray Test - Resistance against any visible changes DIN 74069 ph 6.2.3 Reaction against chemical liquid - submersion in petrol DIN 30646 ph 4.6 Reaction against liquids - submersion in lye DIN 30646 Holding power of the adhesive layer - PSA tensil test ASTM 162 Surface flammability using a radiant heat energy source ASTM 648 Critical radiant flux ASTM 662 Specific optical density of smoke generated by solid materials SMP 800C Bombardier toxic gas collection IMO Resolution Guidelines for the evaluation, testing and application A. 752 (18) location lighting on passenger ships ISO 15370 Low location lighting on passenger ships MIL-L-3891B Luminescent material and equipment (non-radioactive) (Has been replaced by ASTM E 2030-99, ASTM E 2072-00, ASTM E 2073-00) PSPA Classifications Class B ASTM E 2072-00 Std. specification for photoluminescent safety markings ASTM E 2073-02 Std. test method for photopic luminence of photoluminescent markings ASTM E 2030-02 Guide for recommended uses of photoluminescent safety markings This data is based on typical results achieved. It is the sole responsibility of the buyer or user to ensure that the product is suitable for any proposed end use or application and to ensure proper cleaning of the substrate to which it will be applied. This data in no way constitutes a specification, nor should it be seen as a recommendation for use. We accept no liability for any loss, damage or injury resulting from the use of these products or data. March 2004.

Application information will be added soon.

Sustainability documents will be added soon.

Ingredients information will be added soon.

FAQs will be added soon.