Anti Slip Additive, Rubber Aggregate, Rubber Mesh, 1 Lb
|
$4.98
(No reviews yet)
Write a Review
Anti Slip Additive, Rubber Aggregate, Rubber Mesh, 1 Lb
Free Shipping Available:
We offer free shipping for orders over $150 within the continental U.S. (excludes Hawaii, Alaska, & PR)
Anti Slip Additive made with EPDM Fine Mesh Rubber Powder Aggregate to provide a resilient non slip texture that is intended for use with solid color coatings. Our recycled rubber powder is off white and absorbs color very well which increases color durability. The resilient non skid texture is an ideal barefoot friendly solution and is suitable for interior or exterior projects.
Broadcast or In-Can Mix: Mix 1 lb aggregate per 1 gallon of Eco-Tuff Coating for a standard fill texture which provides an approximate 75% coverage. Add more or less as desired. Mix in a separate container by adding rubber first, then the coating to minimize air bubbles.
Broadcast by hand or feed spreader to regulate amount of cover over the first coat while wet. With either process, once the first coat is dry, sweep and/or vacuum to remove any loose aggregates prior to topcoat finish. Apply the finish topcoat as usual. Apply 1 or more clear coats or color topcoats as desired.
Intended Use: Where enhanced slip resistance is required: entryways, steps, decks, wet areas, ramps, etc.
Broadcast or In-Can Mix: Mix 1 lb aggregate per 1 gallon of Eco-Tuff Coating for a standard fill texture which provides an approximate 75% coverage. Add more or less as desired. Mix in a separate container by adding rubber first, then the coating to minimize air bubbles.
Broadcast by hand or feed spreader to regulate amount of cover over the first coat while wet. With either process, once the first coat is dry, sweep and/or vacuum to remove any loose aggregates prior to topcoat finish. Apply the finish topcoat as usual. Apply 1 or more clear coats or color topcoats as desired.
Intended Use: Where enhanced slip resistance is required: entryways, steps, decks, wet areas, ramps, etc.
